toll-free: (866) 936-8476 email: firstname.lastname@example.org
Wastewater professionals depend on innovative technologies to achieve a better return on their investments in pipeline rehabilitation. Pipeline Renewal Technologies delivers that innovation to processes ranging from pipe point repair to relining and lateral reinstatement. Cutting edge technology, combined with dependability and support, have made Pipeline Renewal Technologies the partner of choice for municipalities, engineers and service contractors.
The new patent-pending JetCam 40 uses high-pressure water for propulsion, steering and cleaning as it captures live inspection video from inside lateral lines. Its novel design makes the JetCam 40 uniquely able to traverse multiple bends in pipe; steer through branches; and levitate above debris.
VeriCure monitors cure temperature continuously along the full length of a cured-in-place pipe during installation, distinguishing small thermal variances in zones as small as 1.5'. This information helps ensure storm and sewer lines are rehabilitated to spec, and perform as intended.
Janssen Process addresses the cause of lateral connection and mainline failure: inadequate bedding and support. Fast-curing resins are injected through cracks and joints into surrounding cavities, creating bedding that eliminates roots, infiltration and voids—all without plugging or digging.
Delivering up to 1.9 hp cutting power, the air-driven PC200 makes quick work of lateral reinstatement. For optimum range and precision, its arm articulates on four axes, each proportionally controlled with encoder feedback to remember any cutting position.
The Micro makes cuts as far as 100' inside laterals 3–10". Remote-inflated air bladders allow self-positioning of the cutting head; clamp the arm for precision; and enable cutting feeds of 4". With joystick-controlled articulation, it maneuvers through 90-deg bends in 4" lines.
The new patent-pending JetCam 40 from Pipeline Renewal Technologies (PRT) uses high-pressure water for propulsion, steering and cleaning as it captures live inspection video from inside lateral lines. Its novel design makes the JetCam 40 uniquely able to traverse multiple bends in pipe; steer through branches; and levitate above debris. With these special capabilities, municipal contractors and commercial plumbers can locate failed pipes, cross-bores and blockages, as well as perform cleaning.
The new Micro Premium™ lateral cutter from Pipeline Renewal Technologies delivers 30% more cutting power than the smaller Micro Pro™, as well as a sophisticated touch-screen interface, a larger reservoir for flushing water, and easier connection/monitoring of supply air. In addition, the form factor of the reel broadens options for installing and transporting the system.
Delivering up to 1.9 hp cutting power, the new air-powered IST PC200 from Pipeline Renewal Technologies makes quick work of lateral reinstatement. For optimum range and precision, its cutting arm articulates on four axes, each proportionally controlled with encoder feedback to reach and remember any cutting position in 8–28” relined pipe. The system is built on CAN-Bus control architecture, which not only allows concurrent motion on all axes, but enables remote diagnostics; onboard temperature/pressure/humidity/pitch/roll sensing; easy accessorization; and swivel/zoom of the onboard camera.
Bochum, Germany-based IST GmbH has just named Pipeline Renewal Technologies a North American distributor and service center for its Power CUTTER brand of pipe cutting and lateral reinstatement robots. With the addition of IST to its current lineup, Pipeline Renewal Technologies now offers rehab cutters for applications ranging from lateral cutting to lateral reinstatement and mainline grinding and milling.
Janssen Process, PRT's flagship technology for structural rehabilitation of lateral connections and mainline point repair, has been used for more than 10 years by Essen and other cities in Germany's Ruhr Valley to address thousands of collection system deficiencies. To understand how this initiative dramatically reduced infiltration and service issues, click here to read the full report.
Pipeline Renewal Technologies (PRT) today announced Sean Lipscomb will assume the role of Field Operations Manager effective August 15, 2012. In this role, Mr. Lipscomb will focus primarily on ensuring the success of PRT’s Janssen Process licensees through service, training, and support. He will also act as a liaison between these licensees and PRT’s service department.